Is it not dangerous to lay an electric warm floor under the laminate with your own hands? Concerns are justified given the fact that some flooring materials are limited in temperature. When the permissible temperatures are exceeded, toxic substances are released from the material.
In addition, the flooring is at risk of damage. There are certain reservations for laying laminate flooring on a warm floor. That’s why you need to hire professional Laminate Flooring Installers in Murphy for your under-floor heating system.
Can You Put an Electric Under-Floor Heating Under a Laminate?
To give an answer to this question, perhaps from the recommendations of the manufacturer of a particular laminated material. You should carefully consider the labeling on the laminate packaging: under-floor heating laminate marking.
For installation on warm floors, a coating with a corresponding sign is suitable. But even for such material there are temperature restrictions. When the heating temperature reaches 30°, toxic substances are released from the composition of the material.
This can have consequences for the condition of people. The heating indicator of the cable under-floor heating under the laminate should not exceed 28 °, these are quite normal comfortable conditions in the room.
Electric Thin Mats
They represent a conductor laid in the form of a snake and fixed on a fiberglass mesh. The mesh can be cut into sections (without compromising the integrity of the cable), providing freedom to cover the floor surface of different sizes and shapes. The lower surface of the mesh is covered with an adhesive layer, which ensures quick fixation of the structure to the base.
Laying of such a warm floor is done without using mounting tape. Upon completion of laying and fixing the heating mats, the necessary joining operations and structural testing are performed. Electric thin mats for warm floors; this is an electric under-floor heating under a laminate without a screed, which is possible due to the reduced thickness of the underlying cable. ‘
The underlay for laminated panels will be able to smooth out small irregularities caused by the presence of heating mats. Another advantage of thin mats: installation is not difficult; it is quite possible to do it on your own. Electric thin mats are laid without screed. But this heating system is not suitable for linoleum.
Suitable for Any of the Floor Surfaces
The cable is single-core and two-core. A two-core cable is most often used for floor heating. This fact is explained by its ability to reduce the amount of electromagnetic radiation that occurs during the operation of an electrical circuit for floor heating. Heat cable for under-floor heating under laminate
In this heating system, a connection to a thermostat is mandatory. The heat cable is laid in the screed layer. The considered type of under-floor heating is suitable for both laminated flooring and linoleum.
Self-Regulating Heat Cable
It is tied to a special matrix that regulates the heating process. It detects areas where overheating occurs and reduces or completely cuts off the power. This model is more complicated than a conventional heat cable. The thermostat is not involved; the operating mode includes automatic selection of the optimal heating temperature.
The Bottom Line
Seems like easy? Actually, it’s not. You need to be expert to install the heating system under-floor for the laminate flooring. That’s why you should find professional Laminate Flooring Installers in Murphy to do this complex task for you. The Flooring & Remodeling Shop is always here to assist you to do any job regarding your flooring in Murphy, TX.