The range of such Vinyl Flooring Tiles in Murphy is heterogeneous – the choice of vinyl floors consists of 3 types of similar material at once:
Vinyl Tiles
It resembles ordinary ceramic tiles in appearance and is made in the format of a square or a rectangular or polygon. It has a side size usually from 30 to 60 cm.
Laminated Modules
Extruded rectangular pieces mimic laminate planks. As a rule, the length is 90-120 cm, the width ranges from 10-30 cm.
Rolls
This vinyl floor is similar to linoleum and is offered as a roll of tape 20-25 m long and 1.5-2 m wide. This solution is suitable for large rooms, as it saves installation time. Rolled vinyl flooring may not look different from others. In all these cases, the thickness of the coating is in the range from 1.5 to 3-5 mm – this is sufficient for most situations and tasks in operation.
Resistance Classes of Vinyl Flooring Tiles in Murphy
If we talk about how to choose the right Vinyl Flooring Tiles in Murphy, a mandatory item is its wear resistance classes. Most often they are all divided into 3 groups:
23-31
Conventionally, this group can be called household. The upper protective layer of such a coating is up to 0.2 mm. It will cope with low load and low traffic and lasts from 5 to 10 years depending on conditions.
32-42
This is often referred to as a commercial category. By increasing the thickness of the top film to 0.25 mm, the floors will withstand operation in an office, shop, restaurant, etc. The resource of the material has been increased to 10-15 years.
43
The thickness of the protective film exceeds 0.3 mm, while mineral inclusions are added to it, which results in a rough, very durable coating. Ideal for warehouses, train stations, gyms, etc.
Hard-Wearing Vinyl Flooring Tiles in Murphy
If you choose the right Vinyl Flooring Tiles in Murphy according to its wear resistance class, it will last a long time. Which vinyl floor is better: adhesive or castle or self-adhesive? The correct choice of vinyl flooring should still be based on the method of its installation – since there are also only 3 types of them:
Adhesive Styling
Special glue is applied to the floor, and the floor covering is laid on it. The process is not complicated, but laborious, because you must clearly follow the instructions. Plus you need tools: rollers, spatulas, etc.
Self-Adhesive Tiles
The essence is similar, but the installation principle is much simpler. This is because glue is applied to the back of the floor parts (all or around the perimeter), and you just need to remove the film for gluing to the base.
Locking Mechanisms
For such laying, the modules receive a tongue-groove connection, like a laminate. Therefore, the installation is almost identical: simple and quick, and the need for a special tool are virtually eliminated.
Vinyl Flooring Tiles in Murphy for Different Rooms
If you don’t know how to choose a Vinyl Flooring Tiles in Murphy for a particular room, you can follow these tips:
Living Rooms
For a cozy ambience, buy laminate flooring with wood and bamboo patterns. They are sleek and can be matte or glossy. Chasing a high and, accordingly, expensive class of wear resistance is hardly justified – not those loads.
Kitchen and Bathroom
The optimal design format is traditional tiles. Moreover, it is desirable that she had a special rough coating. This reduces the risk of slipping on wet floors. In the bathroom, all seams should be processed in order to exclude the possibility of moisture penetration to the base and its damage.
Corridors and Hallway
In these rooms, the ability to withstand increased loads is important, so you can spend money on a high-end durability vinyl floor. Even in the corridor and hallway, it will be quite appropriate to lay a roll covering. This will simplify installation and increase the reliability of the coating.